Documentation:

Run UBOS with Docker

UBOS is available on the Docker hub. To run UBOS using Docker:

  1. Make sure you have a reasonably recent Docker installation on your machine.

  2. Boot UBOS with a command such as this:

    > docker run \
        -i -t \
        --cap-add NET_ADMIN --cap-add NET_BIND_SERVICE --cap-add NET_BROADCAST \
        --cap-add NET_RAW --cap-add SYS_ADMIN \
        -v /sys/fs/cgroup:/sys/fs/cgroup:ro \
        -e container=docker \
        ubos/ubos-yellow /bin/init
    

    While that looks somewhat intimidating, all this command really says is: “Boot the image called ubos/ubos-yellow, keep the terminal around, and give it the privileges it needs.”

  3. When the boot process is finished, log in as user root. By default, there is no password on the console.

  4. Now: wait. UBOS needs to generate a few cryptographic keys before it is ready to use and initialize a few other things on the first boot. That might take 5 or 10 minutes on slower platforms. To determine whether UBOS ready, execute:

    > systemctl is-system-running
    

    The Docker container takes entropy from the host computer, so make sure the host Linux system provides enough. Depending your Linux distro, you may be able to generate more by typing on the keyboard, moving the mouse, generating hard drive activity etc. You can also run:

    > sudo systemctl start haveged
    

    on your host (not Docker container).

    Wait until the output of

    > systemctl is-system-running
    

    has changed from starting to running. If it is anything else, consult troubleshooting.

  5. Your Docker container should automatically acquire an IP address. You can check with:

    > ip addr
    

    Make sure you are connected to the internet before attempting to proceed. If you have difficulties reaching the internet from your container, consult troubleshooting.

  6. Update UBOS to the latest and greatest:

    > ubos-admin update
    
  7. You are now ready to set up your first app and site. Note that with the private networking setup described on this page, you will only be able to access apps installed in your UBOS container from the host computer. If you like to access them from anywhere else, you either need to give your container a non-private IP address, or port forward from the host to the container.

  8. To shut down your Docker container, execute

    > shutdown -h now
    

About that run command

If you are interested in the details of the complicated run command, let’s unpack it:

docker run -i -t Run a Docker image Keep a terminal open on the command-line, so you can log into UBOS.
--cap-add NET_ADMIN ... Grant certain needed capabilities to the container running UBOS. These are required so UBOS can manage networking using systemd-networkd and its firewall using iptables.
--v /sys/fs/cgroup:/sys/fs/cgroup:ro Make the “cgroup” device hierarchy available to the container in read-only mode. This is needed so Docker can successfully boot an entire operating system like UBOS.
-e container=docker ubos/ubos-yellow Tell UBOS that it is running under Docker. The UBOS version to download and to run. Here we run the most recent release of UBOS on the “yellow” release channel. To see what UBOS versions are available via Docker, go to the Docker hub.
/bin/init Boot the UBOS operating system, instead of running some other kind of command.

P.S. If you understand Docker better than we do, and there is a way of making the above command-line shorter, please do let us know. Thank you!